Repeater is designed to relay digital data between wireless PowerCode transmitters and a target PowerCode receiver. Repeater links are required when the target receiver is beyond the range of at least some of the wireless transmitters and is therefore incapable of receiving transmissions directly.
If the distance between the transmitters and the target receiver is too large to be covered with one repeater, several auxiliary repeaters may be added along the communication path. This way, a multi-level network is created. Up to 16 auxiliary repeaters can be positioned between the farthest group of transmitters and the target receiver. A receiver module, a transmitter module and a controller motherboard are the building blocks of the Repeater.
Ceasefire's state-of-the-art wireless photoelectric and standalone smoke detection systems give you the critical time window required for effective fire fighting and safe evacuation, preventing extensive damage to your property and saving precious lives.
Introduction: Created to ensure accuracy of event reporting, the Ceasefire repeater assists communication between distant detectors and the Control Panel, guaranteeing no signal loss and zero time lapse. Equipped with a smart anti-collision mechanism, it supports multiple, simultaneous transmissions with ease.
Relays Communication: Relays signals between remote detectors and panel.
Anti-Collision Mechanism: Smart anti-collision mechanism supports multiple simultaneous transmissions.
Low Battery Alerts: Equipped with a facility for visible and transmitted low battery indications.
International Certification: UL listed and EN certified, conforms to CE standards.
IP55 Rated: IP (Ingress Protection) Code classifies and rates the degrees of protection provided against dust and water.
Installer Friendly: Compact and easy to install.
CFR Quality Assurance: Built to Ceasefire's high standards, which are in compliance with international quality standards.
Receiver Type: Super-regenerative.
Modulation Type:100% ASK.
PowerCode ID: One of 16,000,000 possible 24-bit codes
Power Input Ranges:13 - 20 VDC, or 11 - 16 VAC, 100 mA min.
Backup Battery: 9 V-style rechargeable Ni-Cd or Ni-MH. Battery Backup Duration (with fully charged 120 mA/h battery and 1:1 standby/transmit ratio): 2 hours (315 and 433.92 MHz units)
LED indicator: Lights during transmission.
Compliance with Standards: Meets FCC Part 15, MPT 1340 and directive 1999/5/EC
Operating Temperature: 0 °C to 49°C (32° F to 120° F).
Dimensions (H x W x D): 110 x 63 x 25
Weight: 73 gms