A Marine Approved Single Zone Monitor designed to allow up to 6 Marine Approved Conventional Detectors to be interfaced to an analogue addressable system. The unit also features an integral short-circuit isolator.
Introduction : It is a marine approved Single Zone Monitor designed to allow up to 6 conventional detectors to be interfaced to ESP analogue addressable system.
Loop Powered :The device derives it power supply from the loop itself.
Support: A DIN rail is a metal rail of a standard type widely used for mounting circuits.
Open and Short Circuit faults:Each circuit is fully monitored for Open and Short Circuit faults.
Approved by LPCB and VdS: This product is certified and approved by Loss Prevention Certification Board (LPCB) and VdS.
Ceasefire Quality Assurance:Built to Ceasefire's high standards, which are in compliance with international quality standards.
Addressable:Utilises simple DIL switches for reliable addressing.
Fully Monitored: Each circuit is fully monitored for Open and Short Circuit faults.
Installation Flexibility:Smart-Fix housing system for flexibility.
Integral SCI:Features an integral SCI.
Operating Voltage: 17 - 41Vd.c.,
Low Power Mode (0.75S): 170mA,
Quiescent Current: 300mA,
Current Consumption: 22mA ± 20% (Polling),
Current In Short-Circuit: 8mA,
Maximum Short-Circuit Current: 1A,
E.O.L. Device: TE-RH-E (polarity conscious),
Zone Voltage: 15.3V - 17.1V,
Zone Resistance: 50 ohm Max,
Zone Capacitance: 0.3mF Max,
Detectors Per Zone: SLR & DCD - 6 max. Conventional Call Points - No limit,
Operating Temperature Range: –25°C to +70°C,
Storage Temperature Range: –30°C to +70°C,
Maximum Humidity: 95%RH - Non- Condensing (at 40°C),
Weight & Dimensions: 328gL =157mm × W = 127 × D = 35mm (module inc lid) D = 79 mm and weight is 235g,
Colour & Enclosure Material: CHQ Module & CHQ-BACKBOX White ABS, Module Lid Semi-Opaque Black ABS as standard (white version - CHQ-LID(WHT) also available)