The Ceasefire Detection Analogue Addressable range is designed and manufactured to the highest international standards and offers the user the most reliable products for a life safety system.
This extensive range of aesthetically pleasing products is designed to simplify the installation process and minimize cost, allowing seamless integration.
This Dual Input Module is designed to interface to a variety of inputs such as door contacts, sprinkler flow / door switches and plant equipment.
Also available as a DIN Rail mountable version, with or without an integral short-circuit isolator.
Introduction :The Dual Input Module is used to connect and control a variety of inputs such as door contacts, sprinkler flow switches and plant equipment. For higher efficiency of the whole security system, its equipped with an integral short-circuit isolator that isolates short-circuited devices.
Configurable : Each input can be configured to monitor either Normally Open or Normally Closed contacts.
Single Loop Address:Has a single digit address on the loop.
Approved by LPCB and VdS: This product is certified and approved by Loss Prevention Certification Board (LPCB) and VdS.
DIN Rail Version Available:A DIN rail is a metal rail of a standard type widely used for mounting circuits.
Loop Powered: The device derives its power supply from the loop itself.
Independent Inputs: Features two independent inputs for monitoring of volt-free contacts.
CFR Quality Assurance: Built to Ceasefire's high standards, which are in compliance with international quality standards.
Operating Voltage: 17 - 41 VDC,
Low Power Mode (typ): 90µ A,
Quiescent Current:220µ A,
Alarm Current (typ): 5.0µA,
Operating Temperature Range: –10°C to +50°C,
Storage Temperature Range: –30°C to +60°C,
Maximum Humidity: 95%RH - Non Condensing (at 40°C),
Ingress Protection Rating: IP24,
Colour / Case Material: Red / Modified Polyphenylene Oxide,
Weight (g): 110,
Flush Unit With Surface Mount Back Box: 161