In Ceasefire Pro Security System, a sophisticated network of sensors, detectors and cameras are connected through wireless technology to the control panel.
Thanks to the X-10 technology, you can program your security lights to switch on at a preset time, you could also do the same with your indoor lights and so on. Incendently this technology will also work on your other electronic appliances.
In case of your sensors detecting a threat they will send a signal to your control panel which will alert you with an email, a sms and MMS that will show you a recorded footage for 7 seconds during the alarm period.
Peripheral accessories like wristband transmitters can be used to send an emergency signal.
Our software SecureSoft brings your home to you no matter where you are. All you have to do is log in to take a look at your house through the Wi-Fi cameras.
Now your home is only as far as your laptop is.
Introduction : Glass Break Detectors are placed on windows and doors. The second the glass shatters, due to force being applied or an object being thrown through it, a loud alarm sounds out.
360 Degrees Coverage: Acoustic Pattern Recognition Technology provides 360 degrees coverage.
Battery Powered: Works on a long-life standard lithium battery, independent of power supply
Aesthetically Pleasing: Sports a modern, stylish look
Secure Power Code ID : Power Code ID factory-selected from 16 million possible code combinations.
6m Detection Range: Maximum detection range for plate, tampered, laminated and wired glass up to 6m.
CFR Quality Assurance : Built to Ceasefire's high standards, which are in compliance with international quality standards.
Microphone: Omni-directional electret
Alarm Duration: 4 seconds
RF immunity: 20 V/m, 1 MHz to 1000 MHz
Temperature range: -10° to 50°C (14° to 120°F)
Minimum: 0.3 x 0.6 m (1 x 2') or larger glass thickness
Plate: 2.4 to 6.4 mm (3/32 to 1/4")
Tempered: 3.2 to 6.4 mm (1/8 to 1/4")
Wired: 6.4 mm (1/4")
Laminated: 3.2 to 6.4 mm (1/8" to 1/4")
Transmitter's ID Code: 24-bit digital word, over 16 million combinations, pulse width modulation.
Overall Message Length:36 bits
Response to Tamper Event:Tamper report every 3 minutes (until the tamper switch is restored).
Power Source: 3.6 V Lithium Thionyl Chloride (LiSOCl2) battery
Nominal Battery Capacity: 1.2 Ah
Current Drain: 24 μA standby, 13 mA on alarm (including LED)
Operating Temperature: 0°C to 49°C (32°F to 120°F).
Dimensions: 80 x 108 x 43 mm