It is a Marine Approved Heat Sensor that incorporates a Variable Temperature heat element and a Rate Of Rise heat element, both of which are controlled from the Control Panel. This allows either or both elements to simultaneously take a fire decision.
Introduction : Fire start either as a slow-burning flame that gives out a minimum amount of smoke or as a full-scale conflagration. The Multi-Sensor is equipped for both, smoke as well as temperature sensors that can detect a rise in environmental temperature.
Multi-Sensors :Incorporates Optical and Heat sensing elements to detect different types of fires.
360 deg. Viewing: Twin fire LEDs allow 360 degree viewing for greater accuracy.
Pulsing / Non-Pulsing:Can select pulsing or non-pulsing options from the control panel.
Electronically Addressed: Has an electronic address so that the exact location of the fire comes up on the control panel.
Flexibility: Offers user selectable modes so that the detector can be customised to suit the application.
Approved by LPCB and VdS:This product is certified and approved by Loss Prevention Certification Board (LPCB) and VdS.
CFR Quality Assurance:Built to Ceasefire's high standards, which are in compliance with international quality standards.
Operating Voltage: 17 - 41Vd.c,
Low Power Mode (Typ): 110µA,
Quiescent Current (Typ): 350µA,
Alarm Current (Controlled By Cie): 19µA,
Transmission Method: Digital Communications Using ESP,
Operating Temperature Range: –10°C to +50°C,
Storage Temperature Range: –30°C to +70°C,
Maximum Humidity: 95%RH - Non-Condensing (at 40°C),
Ingress Protection Rating: IP46,
Colour / Case Material: Ivory or White / Polycarbonate,
Weight (G): 100,
Diameter (Mm) / Height (Mm): 100 / 38,
Compatible Bases: YBN-R/3, YBO-BS, YBO-BSB, YBO-R/SCI,
Base Fixing Centres (Mm): 48 ~ 74,
Approvals: Approved by LPCB, LR & GL