The Ceasefire Detection Analogue Addressable range is designed and manufactured to the highest international standards and offers the user the most reliable products for a life safety system.
This extensive range of aesthetically pleasing products is designed to simplify the installation process and minimize cost, allowing seamless integration.
This Mains Relay Controller provides a single mains-rated relay output for the control of such devices as dampers, extractors or plant and equipment shutdown.
The monitored input can be used for local power supply fault monitoring or as a general-purpose input.
Product Features
Introduction :The Dual Relay Controller can be used to provide two general-purpose relay outputs, with each output being controlled independently. Useful in case of a fire or electrical problem, the Dual Relay Controller monitors the local power supply for faults.
Single Loop Address : Has a single digit address on the loop.
Approved by LPCB and VdS:This product is certified and approved by Loss Prevention Certification Board (LPCB) and VdS.
DIN Rail Version Avlb: A DIN rail is a metal rail of a standard type widely used for mounting circuits.
Loop Powered:The device derives it power supply from the loop itself.
Changeover Relays: Features two independently controlled changeover relays.
Specification: Relays contact rated at 30Vdc at 1 amp.
Easy Cable Termination: Features screw terminals and flying leads for easy cable termination.
CFR Quality Assurance: Built to Ceasefire's high standards, which are in compliance with international quality standards.
TECHNICAL SPECIFICATIONS
Operating Voltage: 17 - 41 VDC, Low Power Mode (typ): 110µ A*, Quiescent Current:300µ A*, Current Consumption: 22µA ±20% (polling), Current Consumption (Ext): 800µ A (quiescent)70µA (alarm), Current In Short Circuit: 8mA (SCImodule only), Maximum Short- Circuit Current: 1A (SCI module only), Relay Contact Rating: 48Vdc max, 2A (resistive load), Input EOL Resistor: 10, ±5% 0.25W, Input Threshold Levels: ON = 470 ohm, short cct Operating Temperature Range: –10° to +50°C, Storage Temperature Range: –30° to +60°C, Maximum Humidity: 95%RH - Non- Condensing (at 40°C), Weight (g): 325, Colour & Enclosure Material: White ABS / Green ABS (DINs)