It is a Marine Approved Manual Call Point, which is fully compatible with analogue addressable protocol. It incorporates a red LED mounted on the front cover, which can be selected as pulsing/non-pulsing for communications polling and is continuously lit when the unit is being operated. It features a built-in test function to ensure the integrity of the device.
Introduction : The Marine approved Manual Call Point is a handy device that can be installed at different areas across a facility. Connected to a central Control Panel, when hit, the Manual Call Point raises the alarm and indicates the exact location of the problem, facilitating faster assistance.
Fast Response : Designed to facilitate fast response during an emergency.
Approved by LPCB and VdS:This product is certified and approved by Loss Prevention Certification Board (LPCB) and VdS.
Non-Frangible Activation: Non-frangible element fitted as standard (conforms to EN54).
Programming: Addressed with TCH-B100 Hand Held Programmer.
Optional Mounting: Surface or flush mounting.
Status LEDs:Status LEDs give you visual clarity about system and security status at any given point.
IP Rated: IP (Ingress Protection) Code classifies and rates the degrees of protection provided against dust and water.
CFR Quality Assurance: Built to Ceasefire's high standards, which are in compliance with international quality standards.
Operating Voltage: 17 - 41Vd.c,
Low Power Mode (Typ): 90µA,
Quiescent Current (Typ): 220µA,
Alarm Current (Typ): 5.0µA,
Transmission Method: Digital Communications Using ESP,
Operating Temperature Range: –10°C to +50°C,
Storage Temperature Range: –30°C to +60°C,
Maximum Humidity: 95%RH - Non-Condensing (at 40°C),
Ingress Protection Rating: IP24,
Colour / Case Material: Red / Modified Polyphenylene Oxide,
Weight (G) / Dimensions (Mm): (Flush Unit) 110 / W89 × H93 × D27.5 (With Surface Mount Back Box) 161 / W89 × H93 × D59.5