The YBO-R/SCIM Loop Isolator Base is compatible with ESP Marine Approved Sensors and can be used in place of a standard base. This reduces the need to spend on additional Short Circuit Isolators. The Base flashes an amber LED to show when it is isolating a section of the loop. If used under every analogue Sensor on the loop, none will be lost in the event of a short circuit.
Introduction : It is a Loop Isolator, which is fully compatible with Marine Approved analogue addressable protocol. This reduces the need to spend on additional Short Circuit Isolators. The Base flashes an amber LED to show when it is isolating a section of the loop.
Status LED : Facility for a remote indicator output for quicker, more efficient emergency response.
CFR Quality Assurance:Built to Ceasefire's high standards, which are in compliance with international quality standards.
127 Per Loop: Connection of up to 127 per loop.
Short Circuit Detection:Detects short circuits on loop.
Square Cable Clampsr: Quick Connection via square cable clamps.
Bayonet Slot:Bayonet slot, low insertion force for detectors.
Operating Voltage: 17 - 41V.d.c,
Quiescent Current (Typ): 50mA,
Current In Short Circuit: –10°C to +38°C (UL268), –10°C to +60°C (CEA4022),
Maximum Short Circuit Current: 1A,
Operating Temperature Range: –10°C to +50°C,
Storage Temperature Range: –30°C to +60°C,
Maximum Humidity: 95%RH - Non Condensing (at 40°C),
Colour / Case Material: (Base) Ivory, White or Red / ABS (DIN Rail Version) Green / ABS,
Maximum Number Of Isolators Per Loop: 127,
Weight (G) / Dimensions (Mm): (Base) 85/100 (diameter)/H13 (DIN Rail Version) 122/L119 × W24 × H108,
Fixing Centres (Mm): 48 ~ 74