[RS. 6930 + TAXES]
Contrary to popular belief, most burglaries are not random, unplanned acts. In most cases, the burglar is someone who has observed you over time: a former household help or even your ex-watchman could be a potential threat.
He knows your property, the people in it and in many cases, their routine. As for your valuables, every experienced burglar knows where to find them: drawers, cupboards and safes.
So how can you protect yourself against even the most calculated attack?
With Ceasefire’s security system you can leave your home confident that a break-in will automatically sound an alarm, activate a response, and inform you via your telephone.
Motion detectors, wired siren, magnetic contacts and curtain detectors alert you the second an intruder breaks in. Flood and smoke detectors alert you in case of flooding and fire. And the central control panel monitors the overall security of your home. This system leaves no corner unguarded.
Introduction : The Oval Motion Detector transmits infrared rays in various directions, covering the surrounding areas. When the rays are crossed, it sets off the Motion Detector Alarm, alerting everyone in the vicinity to the presence of an intruder.
Wide Angle Lens: Wide angle lens for greater coverage.
Efficient Design: Dedicated keys for Away, Home and Disarm ensure commands are quickly transmitted and put into action.
Automatic Alerts: Sends automatic Low-Battery and tamper alerts.
Automatic Re-Arm: Automatically Re-Arms two minutes after the last alert.
Stylish: Elegantly styled for surface or corner mounting.
Advance TME: Reduced likelihood of false alarms due to Advance TME (True Motion Recognition
CFR Quality Assurance : Built to Ceasefire's high standards, which are in compliance with international quality standards.
Detector Type: Dual element low noise pyroelectric sensor.
No. of Curtain Beams: 9,
Max. Coverage: 12 x 12 m (40 x 40 ft) / 90°
Pet Immunity: Up to 38 kg (85 lb).
Internal Battery: 3V Lithium battery, type CR-123A. For UL installations, use Panasonic or Sanyo only.
Nominal Battery Capacity: 1450 mA/h.
Standby Current Drain: Approx. 0.025 mA.
Transmit Current Drain: 20 mA (including LED).
Battery Life (with LED on): Typically over 3 years.
True Motion Event Verification: 2 position selector - 1 (OFF) or 2 (ON) motion events.
Alarm Period: 3 seconds.
Rearm Timer: Rearms the detector 2 minutes after the last alarm.
Timer disabled in the walk test mode – not applicable for the DD243 version (see section 1).
Transmission Sequence: 3 data bursts at variable intervals within 3 seconds.
Encoding: 24-bit ID, over 16 million possible combinations. Total.
Message Length: 36 bits.
Tamper Alert: Reported when a tamper event occurs and in any subsequent message, until the tamper switch is restored.
Supervision Message: Signaling at 60 minutes interval (U.S. version)
15 minute interval (UK version) or according to local standards.
Height: 1.8 - 2.4 m (6 - 8 ft). Recommended height up to 2.1 m (7 ft)
Installation Options: Surface or corner
BR-1: Surface mounted swivel bracket, adjustable 30° down and 45° left/45° right, BR-1 with a corner adapter, BR-1 with a ceiling adapter
RFI Protection: >20 V/m up to 1000 MHz.
Operating Temperatures: -10°C to 50°C (14°F to 122°F).
Storage Temperatures: -20°C to 60°C (-4°F to 140°F).
Compliance with Standards: Designed to meet FCC Part 15 and Directive 1999/5/EC of the European Parliament.
Dimensions (H x W x D): 94.5 x 63.5 x 53.0 mm (3-11/16 x 2-1/2 x 2-1/16”).
Weight : 70 gms.