In Ceasefire Pro Security System, a sophsticated network of sensors, detectors and cameras are connected through wireless technology to the control panel.
Thanks to the X-10 technology, you can program your security lights to switch on at a preset time, you could also do the same with your indoor lights and so on. Incendently this technology will also work on your other electronic appliances.
In case of your sensors detecting a threat they will send a signal to your control panel which will alert you with an email, a sms and MMS that will show you a recorded footage for 7 seconds during the alarm period.
Peripheral accessories like wristband transmitters can be used to send an emergency signal.
Our software SecureSoft brings your home to you no matter where you are. All you have to do is log in to take a look at your house through the Wi-Fi cameras.
Now your home is only as far as your laptop is.
Introduction : The Oval Motion Detector transmits infrared rays in various directions, covering the surrounding areas. When the rays are crossed, it sets off the Motion Detector Alarm, alerting everyone in the vicinity to the presence of an intruder.
Wide Angle Lens: Wide angle lens for greater coverage.
Efficient Design: Dedicated keys for Away, Home and Disarm ensure commands are quickly transmitted and put into action.
Automatic Alerts: Sends automatic Low-Battery and tamper alerts.
Automatic Re-Arm: Automatically Re-Arms two minutes after the last alert.
Stylish: Elegantly styled for surface or corner mounting.
Advance TME: Reduced likelihood of false alarms due to Advance TME (True Motion Recognition
CFR Quality Assurance : Built to Ceasefire's high standards, which are in compliance with international quality standards.
Detector Type: Dual element low noise pyroelectric sensor.
No. of Curtain Beams: 9,
Max. Coverage: 12 x 12 m (40 x 40 ft) / 90°
Pet Immunity: Up to 38 kg (85 lb).
Internal Battery: 3V Lithium battery, type CR-123A. For UL installations, use Panasonic or Sanyo only.
Nominal Battery Capacity: 1450 mA/h.
Standby Current Drain: Approx. 0.025 mA.
Transmit Current Drain: 20 mA (including LED).
Battery Life (with LED on): Typically over 3 years.
True Motion Event Verification: 2 position selector - 1 (OFF) or 2 (ON) motion events.
Alarm Period: 3 seconds.
Rearm Timer: Rearms the detector 2 minutes after the last alarm.
Timer disabled in the walk test mode – not applicable for the DD243 version (see section 1).
Transmission Sequence: 3 data bursts at variable intervals within 3 seconds.
Encoding: 24-bit ID, over 16 million possible combinations. Total.
Message Length: 36 bits.
Tamper Alert: Reported when a tamper event occurs and in any subsequent message, until the tamper switch is restored.
Supervision Message: Signaling at 60 minutes interval (U.S. version)
15 minute interval (UK version) or according to local standards.
Height: 1.8 - 2.4 m (6 - 8 ft). Recommended height up to 2.1 m (7 ft)
Installation Options: Surface or corner
BR-1: Surface mounted swivel bracket, adjustable 30° down and 45° left/45° right, BR-1 with a corner adapter, BR-1 with a ceiling adapter
RFI Protection: >20 V/m up to 1000 MHz.
Operating Temperatures: -10°C to 50°C (14°F to 122°F).
Storage Temperatures: -20°C to 60°C (-4°F to 140°F).
Compliance with Standards: Designed to meet FCC Part 15 and Directive 1999/5/EC of the European Parliament.
Dimensions (H x W x D): 94.5 x 63.5 x 53.0 mm (3-11/16 x 2-1/2 x 2-1/16”).
Weight : 70 gms.