[RS. 54000 + TAXES]
In Ceasefire Pro Security System, a sophsticated network of sensors, detectors and cameras are connected through wireless technology to the control panel.
Thanks to the X-10 technology, you can program your security lights to switch on at a preset time, you could also do the same with your indoor lights and so on. Incendently this technology will also work on your other electronic appliances.
In case of your sensors detecting a threat they will send a signal to your control panel which will alert you with an email, a sms and MMS that will show you a recorded footage for 7 seconds during the alarm period.
Peripheral accessories like wristband transmitters can be used to send an emergency signal.
Our software SecureSoft brings your home to you no matter where you are. All you have to do is log in to take a look at your house through the Wi-Fi cameras.
Now your home is only as far as your laptop is.
Introduction: The 1CS54 Pro Panel is at the heart of any home's security system. It tracks, controls and communicates with up to 28 wireless devices. It also provides you access to pre and post alarm events via MMS and e-mail and lets you control the lights in your home when you’re away.
28 wireless zones: Can be connected wirelessly to up to 28 devices.
2 wired zones : Can be connected to up to 2 wired devices
Backlit keypad: Backlit keypad for high visibility even in low light conditions.
Efficient Functioning : Features 3 Arming modes – Home, Away & Disarm. Once armed, it will function accordingly.
Entry/ Exit Delay: Entry/ Exit Delay function helps reduce false alarms.
Panic Features: Features variable panic features. Select from Panic, Emergency and Fire.
100 event log and real-time clock:Recording and storage of eventsensures that one can track back and refer to previous events leading up to an incident. A real-time clock ensures accuracy of tracking and logging events.
Two-Way Communication: Facility for two-way audio communication between telephone user and Control Panel user.
Messaging centre: Sends MMS, e-mail and SMS with pre and post-event photos and video clips to pre-programmed numbers and e-mail addresses
Pre and post alarm condition movements: User can retrieve pre and post alarm condition movements via MMS, E-mail.
X-10 Capability: User can control home lighting using internet and X-10 modules / interface.
Two Chimes: Offers melody chime and zone chime to provide a tone each time the magnet is dismantled.
Full Voice Response: The panel gives clear audio notifications to indicate system status,zone descriptions, alarms and emergencies.
PGM Output: Programmable output that activates whenever the system is armed.
Built in Powerlink: Enables view and control of the system over the Internet.
Division of Premises: Option to divide one’s premises into 4 partitions so that user can select which areas to arm/disarm.
Status LEDs give you visual clarity about system and security status at any given point:
Ceasefire Quality Assurance: Built to Ceasefire's high standards, which are in compliance with international quality standards.
Zones Number: 28 wireless, 2 hardwired (zones 29 & 30).
Hardwired Zone Requirements:2.2 kΩ E.O.L. resistance (max. resistance of wires 220 Ω).
Zone Types: Interior follower, interior, perimeter, perimeter follower, delay 1, delay 2, 24h silent, 24h audible, fire, nonalarm, emergency, gas, flood, temperature and interior /perimeter.
Display: Single line, Backlit 16-character LCD.
Alarm Types: Silent alarm, siren alarm or sounder (internal) alarm, in accordance with zone attributes.
Siren Signals: Continuous (intrusion / 24 hours / panic); triple pulse - pause - triple pulse... (fire).
Siren (bell) Timeout:Programmable
Internal Sounder Output: At least 85 dBA at 10 ft (3 m)
Supervision: Programmable time frame for inactivity alert
Data Retrieval: Status, alarm memory, trouble, event log.
Compliance with U.S. Standards: Meets FCC Part 15 and Part 68 requirements. Ul1637, UL1635, UL1023, UL985, ULC-S545-02, ULC C1023.
Receiver Type: Super-heterodyne, fixed frequency
Receiver Range: 600 ft (180 m) in open space
Antenna Type: Spatial diversity
Coding: PowerCode and/or CodeSecure™
Power Supply: Internal switching power supply 100VAC to 240VAC, 50/60 Hz, 0.5A / 12.5 VDC, 1.6A.
Maximum Output Ripple: 0.05
Current Drain: Approx. 40 mA standby, 1400 mA at full load and in alarm.
Site External Siren Current (EXT): 450* mA max @ 10.5 VDC minimum when powered by AC & DC (battery).
Site Internal Siren Current (INT): 450* mA max. @ 10.5 VDC minimum when powered by AC & DC (battery)
PGM Output Current: 100* mA max.
Wired Detectors (zones 29 & 30)
Total (Sum) Current: 36* mA max.
High Current / Short Circuit Protection: All outputs are protected (automatic reset fuse).
Total Pro Panel output current: 550 mA.
Maximum battery recharge time: 72 hours
Battery Test: Once every 10 seconds.
Built-in Modem: 300 baud, Bell 103 protocol
Data Transfer to Local Computer: Via RS232 serial port
Report Destinations: 2 central stations, 4 private telephones
Reporting Format Options: SIA, Pulse 4/2 1900/1400 Hz, Pulse 4/2 1800/2300 Hz, Contact ID, Scancom.
Pulse Rate: 10, 20, 33 and 40 pps – programmable
Message to Private Phones: Tone or voice
Message to Pager: PINNo Zone No.Pin No. * Alarm Type * Zone No.
Operating Temp. Range: 14°F to 120°F (-10°C to 49°C)
Storage Temp. Range: -4°F to 140°F (-20°C to 60°C)
Humidity: 85% relative humidity, @ 30°C (86°F)
Dimensions: 285 x 215 x 55 mm
Weight: 1600 g ms