The Ceasefire Detection Analogue Addressable range is designed and manufactured to the highest international standards and offers the user the most reliable products for a life safety system.
This extensive range of aesthetically pleasing products is designed to simplify the installation process and minimize cost, allowing seamless integration.
This Single Zone Monitor is designed to allow up to 6 conventional detectors or 1 SPC-ET/SRA-ET beam detectors to be interfaced to Ceasefire's ESP Analogue Addressable system.
It's also available as a DIN Rail mountable version, with or without an integral short-circuit isolator.
Introduction : It is a single zone monitor designed to allow up to 6 conventional detectors to be interfaced to ESP analogue.
Loop Powered : The device derives it power supply from the loop itself.
DIN Rail Version available : A DIN rail is a metal rail of a standard type widely used for mounting circuits.
Open and Short Circuit faults: Each circuit is fully monitored for open and short circuit faults.
Approved by LPCB and Vds : This product is certified and approved by Loss Prevention Certification Board (LPCB) and vdS.
Ceasefire Quality Assurance: Built to Ceasefire's high standards, which are in compliance with international quality standards.
Operating Voltage: 17 - 41 VDC,
Low Power Mode (typ): 150µ A*,
Quiescent Current:250µ A*,
Current Consumption: 22µA ±20% (polling),
Current In Short-Circuit: 8mA (SCImodule only),
Maximum Short-Circuit Current:1A (SCI module only),
Zone Voltage:15.3V - 17.1V,
Zone Resistance: 50 ohm Max,
Zone Capacitance: 0.3 F Max,
Operating Temperature Range: –10° to +50°C,
Storage Temperature Range: –30° to +60°C,
Maximum Humidity: 95%RH - Non- Condensing (at 40°C),
Weight (g): 325,
Colour & Enclosure Material: White ABS / Green ABS (DINs)