In Ceasefire Pro Security System, a sophisticated network of sensors, detectors and cameras are connected through wireless technology to the control panel.
Thanks to the X-10 technology, you can program your security lights to switch on at a preset time, you could also do the same with your indoor lights and so on. Incendently this technology will also work on your other electronic appliances.
In case of your sensors detecting a threat they will send a signal to your control panel which will alert you with an email, a sms and MMS that will show you a recorded footage for 7 seconds during the alarm period.
Peripheral accessories like wristband transmitters can be used to send an emergency signal.
Our software SecureSoft brings your home to you no matter where you are. All you have to do is log in to take a look at your house through the Wi-Fi cameras.
Now your home is only as far as your laptop is.
Introduction: The X-10 Switch is a remote controlled relay mounted on a DIN rail in a distribution box. It switches hard-wired circuits between several wall switches. The internal relay can be tripped by an X10 Controller.
Remote Controlled Relay: The DIN rail Switch is a remote controlled relay.
Distribution Box: It switches hard-wired circuits with several wall switches.
Ceasefire Quality Assurance: Built to Ceasefire's high standards, which are in compliance with international quality standards.
Supply Voltage: 230V +10% -15% 50 Hz
Supply Current: ≤ 20 mA capacitive
Making Capacity: - 2000 W ( incandescent lamp) - 3 A (motors) - 16 A (resistive loads)
EMC Emission: A ccording to EN 50081-1
EMC Immunity: A ccording to EN 50082-1
Electrical Safety: A ccording to EN 60950 1 and EN 60065
Signal Sensitivity: 5 mVpp min 50 mVp max at 120 kHz
Input Impedance: ≥ 180 Ohms (L - N) at 120 kHz
Connections: S crew type terminals for phase, eutral,switched phase, control 1
Dimensions:81 x 23.5x32.5 mm
Ambient Temperature: 10° C to + 40° C (operation) - 20° C to + 70° C (storage)