In Ceasefire Pro Security System, a sophisticated network of sensors, detectors and cameras are connected through wireless technology to the control panel.
Thanks to the X-10 technology, you can program your security lights to switch on at a preset time, you could also do the same with your indoor lights and so on. Incendently this technology will also work on your other electronic appliances.
In case of your sensors detecting a threat they will send a signal to your control panel which will alert you with an email, a sms and MMS that will show you a recorded footage for 7 seconds during the alarm period.
Peripheral accessories like wristband transmitters can be used to send an emergency signal.
Our software SecureSoft brings your home to you no matter where you are. All you have to do is log in to take a look at your house through the Wi-Fi cameras.
Now your home is only as far as your laptop is.
Introduction: The function of the PLC control is decided by the central control panel which generates X10 codes and the interface then transfers the same onto the PowerLine to X-10 Module for on/off of relay.
Power Indication: LED Lamp to indicate power
Ceasefire Quality Assurance: Built to Ceasefire's high standards, which are in compliance with international quality standards.
AC supply : 230V +10% -15% 50 Hz
Carrier frequency : 120 kHz ± 2 kHz Back up Battery : 2 * AAA ALKALINE
Ambient Temperature: –10° to +40°C (Operation) and –20° to +70°C (storage)
HF Power to AC power line : 60 mW average into 5W